How to EQ Vocals for Beginners: A Practical 10-Step Guide

A strong vocal performance only works if it’s mixed properly, allowing the singer’s voice to sit clearly above the instruments.

Knowing how to EQ vocals is essential for shaping tone, removing problem frequencies, and helping vocals cut through a mix without sounding harsh or thin.

In this guide, you’ll learn how to EQ vocals step by step, using practical techniques to balance frequencies, enhance clarity, and achieve a clean, professional sound.

What Is EQing Vocals?

EQing vocals is the process of adjusting the frequency range of a recorded voice to enhance clarity and presence in the overall mix.

Why Is Vocal EQing Important?

If you’ve written a song that features prominent vocals, you’ll need to bring them to life by applying EQ in your production workflow.

Vocal EQing is used by mainstream and successful independent artists on their releases, ensuring the vocals are:

• Free from unwanted frequencies: The first step in EQing vocals is to clean up the recording by removing background noise, microphone issues, and other unwanted frequencies. This is applied to specific frequency ranges, removing muddy or harsh tones to create a natural sound.
• Spaced around other instruments in the mix: EQing your vocals is also vital for ensuring they sit within the mix without getting overwhelmed by instruments. Producers can achieve this throughout the vocal recordings, addressing verses, choruses, and transitions.
• Enhancing the vocal performance: In addition to refining the recording, EQ can add air and brightness to the vocals. These processes can then be further enhanced with effects, such as reverb and delay, to add atmosphere and presence.

Each of these qualities can be refined using music production software, with a wide variety of EQ plugins to choose from.

Further reading: The best music production schools.

Understanding Vocal Frequency Ranges

Before making EQ adjustments, it’s important to understand how the performer’s range and register impact every vocal sound.

Vocal range refers to the span of pitches a singer can produce, from bass to soprano, with register relating to how tones are produced.

As vocalists move higher in pitch, the register shifts from the chest to the head, changing the vocal’s resonance.

While the best singers of all time transition between these resonance shifts, it can sometimes lead to recordings that sound thin.

These issues can be addressed in the best DAWs by altering vocal EQ settings for nasal tones, plosives, and other vocal imperfections.

How to EQ Vocals For Beginners: Step-By-Step

Whether you’re producing a song for a solo artist or working on a band’s release with backing vocals, the EQing stage is vital.

Here’s how to EQ vocals, covering the basic processes applicable to most vocals and ensuring everything sounds good in the mix:

Step 1: Prepare The Vocal Track

Preparing any audio track is a fundamental role for music producers, and this applies equally to mixing vocals.

Excellent vocals transform a written melody into a fully expressive track, recorded in a studio.

Before you can apply EQ, however, you’ll need to prepare the track in your software’s editor, trimming the clips to remove unwanted noises.

This stage can also include comping your vocals, which is when multiple recordings are combined based on the best takes.

You can also set up a vocal chain, which may include various EQs, compressors, and effect plugins.

Step 2: Apply A High-Pass Filter

Once your vocal track is prepared, you can move on to the next stage of music production for vocals by applying a high-pass filter.

The high-pass filter allows only high frequencies through and can be used to remove unwanted lower-frequency components.

For vocals, this means addressing a frequency range below 150 Hz and sweeping the filter from roughly 60–120 Hz, depending on the singer’s voice.

Pay attention to the body of your vocals as you set the threshold to avoid losing presence, listening for other unwanted sounds.

By clearing space in the lower frequencies of the vocal mix, your bass lines and kick drums will become more pronounced.

Discover more: How to start producing music.

Step 3: Shape the Vocal’s Body

The fundamental pitch of most vocals generally ranges from roughly 85 Hz to 255 Hz, with variations among individual singers.

Much of the perceived body and warmth of a vocal performance extends into the low-mid range, where it can be enhanced.

Boost this range too much, and vocals will become boomy and lack clarity, while too little will thin out their presence in the mix.

This can be addressed by using the “boost and sweep” technique and applying a bell filter with a tight Q to isolate troublesome frequencies.

By moving this bell filter around this frequency range, you can identify and tweak the resonance of your vocal performance.

Step 4: Address Muddy & Boxy Frequencies

Next, you’ll need to move through the 400 Hz to 800 Hz frequency range to address any throatiness in the recorded vocals.

This effect can create a muddy, boxy vocal that sounds unnatural, which can be isolated using the aforementioned “boost and sweep” technique.

It may well be that these unwanted frequencies are present only in certain sections of the song, such as a verse or a transition.

If that’s the case, you can mix music using a dynamic EQ on your vocals to control changes in mic distances, only cutting at specific moments.

Step 5: Manage Nasal Tones In The Human Voice

Another common issue producers face when recording vocal music is addressing performance imperfections.

This includes strong nasal tones, which produce resonant mid-range frequencies between 800 Hz and 2 kHz.

To fix the high-frequency-range nasal “honk” sound, you can use a parametric EQ with a narrow or medium Q to cut it.

Additional EQing around the 4 kHz region may be required if harsh, nasal overtones are present in the performance.

Ultimately, properly setting up microphones and soundproofing your studio will minimize many unwanted sounds before EQing.

Step 6: Enhance Clarity and Presence

Moving to the 1.5 kHz to 5 kHz range, the next stage in vocal EQing is where the most intelligible elements of the human voice reside.

When EQing your vocals, you can make small boosts or cuts to brighten up the performance and add clarity and presence.

You can also add vocal compression to control the dynamic range, bringing loud peaks and quieter sections into unison.

Step 7: Control Sibilance

Another issue that often requires control at higher frequencies is sibilance, which is common when singing “Ts” and “Ss”.

Often prominent in the 5 kHz to 8 kHz range, these sibilant frequencies are typically controlled by applying narrow cuts.

Since sibilance is inconsistently present throughout the song’s structure, you can use dynamic EQ to ensure it only activates and cuts gain when needed.

Step 8: Apply Complementary EQing

Throughout your vocal EQ processing, consider how other instruments or backing vocals affect your changes.

This means applying complementary EQing, checking other instruments for masking of the vocal’s key frequencies.

You can streamline this process by paying attention to the frequencies of all your project’s instruments and checking for overlaps.

This will allow you to apply complementary cuts to instruments, or boost the vocals so they cut through any overlapping guitars or synths.

Step 9: Add Air and Openness

In the next step of EQing vocals, move to the high-frequency range to create air between 10 kHz and 12 kHz.

This can be achieved with most music production equipment by adding a high-shelf EQ boost, applying around 2 to 3 dB.

There are also dedicated “Air” EQ plugins that deliver more precise results, such as the Maag Audio EQ4 or Slate Digital’s “Fresh Air” plugin.

Once you’ve made these adjustments, you can apply additional effects, such as saturation and harmonic exciters, to increase brightness.

Step 10: Finalize The Adjustments

Once you’ve completed the EQing above on your vocals, you can finalize the adjustments and save any settings you want to reuse.

In this stage, take the time to relisten to the vocals across the entire mix and reevaluate how they interact with other instruments.

This contextual listening will help you address any issues you may have overlooked and improve EQ for other project elements.

You can also make additional improvements to the mixing and mastering, ready for releasing the finished track to your audience.

Learn more: Top 10 music production tips.

Common Vocal EQ Mistakes To Avoid

Vocal performances feature complex, rich sounds that span multiple fundamental frequencies, which producers must address.

Here are some of the most common vocal EQing mistakes made by producers, and the steps you can take to avoid them:

• Not using a pop filter when recording: Recording vocals requires capturing the performance in detail, but it can also pick up unwanted sounds. Using a pop filter is essential for minimizing plosives and excessive air bursts when recording vocals while making music.
• Overusing the high-pass filter and losing body: The high-pass filter is an essential tool for removing unwanted low-frequency content, but avoid overusing it. Doing so can negatively affect the vocal body, resulting in a thin and brittle sound.
• Ignoring how it fits into the overall mix: Excellent vocals are part of a larger musical arrangement that must be considered throughout the EQ process. If you don’t toggle between the isolated vocal track and the entire mix, you won’t be able to gauge whether it cuts through other instruments.

By striving for EQ consistency and avoiding excessive surgical cuts, you can create a balanced vocal performance.

Vocal EQ Tools and Resources

If you’re new to production or refining your vocal EQ settings, there are many excellent resources to guide you through the process.

Here are some popular tools and resources you can use to EQ vocals with polished and professional results:

• Built-in EQ in DAWs: Using a digital audio workstation provides access to built-in EQ features that can be easily applied to vocals. Most DAWs include at least one high-quality parametric EQ, with high-end options also offering dynamic or graphic EQs.
• Free and paid VST plugins: If the built-in EQs aren’t delivering the results you’re looking for, you can add paid and free VST plugins to your setup. Check out plugins that emulate classic hardware to bring additional warmth and texture to your track’s vocals.
• Cheat sheets and online tutorials: If you’re struggling with frequency ranges, cheat sheets can make it easier to remove unwanted frequencies from your vocals. You can expand your knowledge further through online music production courses and video tutorials on YouTube.

Related reading: How to build a home recording studio.

Tips for Improving Vocal EQ

Learning how to become a music producer is an ongoing process, but there’s a great deal that you can learn from professionals.

These are some tips for enhancing your singer’s voice using techniques and vocal EQ settings used in professional studios:

• Use double-tracking for thicker vocals: Double-tracking is widely used across popular music genres to create fuller, wider vocals. When using this technique, record a new take of natural sound rather than duplicating an existing one, as the existing one will lack subtle pitch variations.
• Customize your headphones for vocal accuracy: If you’re mixing on headphones and can adjust the EQ settings, consider applying calibration and correction curves. These settings will ensure your EQ adjustments are as accurate as possible, matching the recording’s intended coloration.
• Use parallel processing for added weight: Applying significant EQ and audio compression changes can ruin the dynamics of the original vocals, but parallel processing can prevent this. It can also be used when applying heavy saturation and other effects without removing natural transients.

Using reference tracks as a guide for your EQing can also help you to shape the overall sound of your vocals.

Summary

EQing vocals is a balancing act that shapes tone, clarity, and presence while helping the voice sit naturally in the mix.

By following the EQing steps outlined in this guide, you can identify problem frequencies, enhance intelligibility, and create space for vocals without overprocessing.

When combined with careful listening and subtle effects, these techniques give you a reliable foundation for producing clear, professional-sounding vocals in any genre.